AirCheck G3 vs LinkRunner comparison

AirCheck G3 and LinkRunner are both solutions in the Network Troubleshooting category. AirCheck G3 is ranked #7, while LinkRunner is ranked #1 with an average rating of 8.0. AirCheck G3 holds a 8.0% mindshare in NT, compared to LinkRunner’s 17.8% mindshare. Additionally, 100% of AirCheck G3 users are willing to recommend the solution, compared to 90% of LinkRunner users who would recommend it.

AirCheck G3

Read 13 AirCheck G3 reviews

809 Views
278 Comparison Views

100% willing to recommend

LinkRunner

Read 20 LinkRunner reviews

2,425 Views
689 Comparison Views

90% willing to recommend

AirCheck G3

LinkRunner

Comparison Buyer's Guide

Download the report

Executive SummaryUpdated on Jul 11, 2024

AirCheck G3 and LinkRunner are two network testing tools designed for different user needs. Based on user reviews, LinkRunner has the upper hand in overall satisfaction though AirCheck G3 excels in certain aspects.

Features: Users note the comprehensive Wi-Fi testing capabilities of AirCheck G3, its ability to pinpoint network issues quickly, and specific Wi-Fi features. LinkRunner users highlight detailed network discovery, diagnostics features providing extensive data, and broader network diagnostics offering more versatility.

Room for Improvement: AirCheck G3 users suggest improvements in battery life, more robust reporting options, and hardware enhancements. LinkRunner users recommend enhancements in network discovery speed, additional functionalities for detailed testing, and software upgrades.

Ease of Deployment and Customer Service: AirCheck G3 is praised for quick setup and intuitive usage, though users report mixed feelings about customer support responsiveness. LinkRunner users find deployment straightforward and appreciate comprehensive customer support.

Pricing and ROI: AirCheck G3 users find the initial setup cost reasonable but have varying opinions on long-term ROI. LinkRunner is perceived as more expensive initially but justifiable due to extensive features and positive ROI.

To learn more, read our detailed AirCheck G3 vs. LinkRunner Report (Updated: April 2025).

Buyer's Guide

AirCheck G3 vs. LinkRunner

April 2025

Download the complete report

Helped 852,098 peers since 2012

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Categories and Ranking

AirCheck G3

Ranking in Network Troubleshooting

7th

Average Rating

8.6

Number of Reviews

Ranking in other categories

No ranking in other categories

LinkRunner

Ranking in Network Troubleshooting

1st

Average Rating

8.6

Reviews Sentiment

8.2

Number of Reviews

Ranking in other categories

No ranking in other categories

Mindshare comparison

As of May 2025, in the Network Troubleshooting category, the mindshare of AirCheck G3 is 8.0%, down from 8.2% compared to the previous year. The mindshare of LinkRunner is 17.8%, down from 23.3% compared to the previous year. It is calculated based on PeerSpot user engagement data.

Network Troubleshooting

Featured Reviews

David-Prusynski

Senior Network Engineer at a healthcare company with 5,001-10,000 employees

A portable, rugged device that reduces resolution time and saves thousands of dollars

It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you can eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address. That'd be a nice function. We should be able to put an AP to MAC address in Excel and export it as a CSV file and then import it. That'd be nice to have because I have that information for all my hospitals. The one I'm doing this weekend has got 550 access points. It is much easier for me to look at an AP name than to get a MAC address. Currently, I have to go to a different spreadsheet and try to find that MAC address. If I had the AP name, it would be like, "Okay. Yep. See it. Done." They are doing spectrum analysis in G3, which I would love to have in G2. That's a nice tool to have, and from what I heard, that's the same price. I'd like to have that. The other function I would love to see is the ability to test fiber. I know the $10,000 version has the ability to test fiber, but I would love this lower-cost device to be able to test fiber.

Read full review

Jesse_B

Manager of networks and infrastructure at a government with 5,001-10,000 employees

Impressive ease of use, gives comprehensive results in seconds, and saves a lot of time and resources

I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources. Its ease of use is very impressive. LinkRunner allows me to have my technicians run tests that are normally too complex and require a network specialist. AutoTest works with just one click. AutoTest does a lot of testing that would normally require a network specialist to log in to a switch and check out VLAN based on a port. My technicians don't have to log in to the switch anymore. They can just do AutoTest and information is provided online. So, I no longer have to send a specialist. I can have my technician run these very complex tests. It saves me on resources, time, and site visits. When it comes to troubleshooting, based on my experience, it has given very useful and very helpful information, especially for my field technicians. It has reduced my visits and the amount of presence because it gives a very comprehensive report on your network tests. It tests multiple variables and multiple parameters and gives a very informative report that makes it easy to pinpoint what is the root cause. There are many tools in this one solution. It's basically a bunch of toolkits or tool sets in one device, which makes it very powerful testing equipment.

Read full review

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pros

"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."

"It is a pretty rock-solid device that is well-built."

"The ability to push data to Link-Live is really important. On the main screen, you can see all the system parameters, and then you can also go and see all the current systems that are operating. They all have different SSIDs or system identifiers, and you can see all SSIDs that are operating in a certain area. Being able to see that and being able to dive into each one and figure out what frequency it is operating under is valuable."

"The auto-test, channel scanner, packet capture, and Link-Live integration are all crucial features we use regularly. The wired cable tester is also indispensable. We frequently run into problems during cable testing that are hard to pin down. When tracking down a cable problem, you usually need to plug something into the cable and ensure the cable plant is reliable."

"The airCheck is the real-time spectrum analyzer to see clients that could be connecting to our network, not just rogue networks out there, but rogue clients and other interference in that particular spectrum."

"I like the cloud functionality. That's very useful because somebody can go onsite, someone who is not really skilled, and I can see the test results from the office."

"AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."

"The information provided by the solution for resolving connectivity and performance problems is very thorough. The reporting functionality is extremely good as I can pass that information on with little input. The device will identify issues and problems, e.g., the diagnostic material. When you have Internet access, it sends the information to your email address, which is very useful."

More AirCheck G3 pros

"In terms of network validation, and copper and fiber Ethernet configuration, I can't imagine life without LinkRunner devices. The minute I got the 10G, everybody was fighting over it. They had never used such a device before and it was just breathtaking for them to very quickly see the validation you can gain from these devices."

"The LLDP decoding is better than on some of the other devices that we've used. Specifically, it goes beyond the minimum of the LLDP data to decode, and it shows the LLDP port descriptions. That makes it vastly simpler to identify which port you're connecting to on a switch that's patched back to some other building, rather than having to figure out an SNMP index or something else."

"Performance testing is the most valuable feature. It gives a brief summary of the information we're looking at, such as latency, jitter, and the available throughput."

"The AutoTest feature makes it easy for you on both ends. It's an excellent feature, especially if you're by yourself. You plug one end in and you hit AutoTest. It sits and waits for you to plug in the other end and it starts testing."

"Having the results sent directly, via email, from the LinkRunner itself makes it really great for logging different things that you're trying to document within your organization. You can have a paper trail of what your organization has as far as infrastructure goes."

"The auto-test feature is vital and does 90 percent of what I need on its own. It's fast and I can get there in just a few clicks. It does a good job and tells me everything I need to know. LinkRunner works pretty quickly and always seems to be accurate."

"It is fast in providing results. It is pretty accurate."

"LinkRunner 10G is very handy for onsite troubleshooting and implementations. We can quickly identify the links in terms of 1G, 2.5G, 5G, and 10G on the copper side, and also from 1G up to 10G on the fiber side. It is very handy for me because we deal with a lot of banks. Especially for the provisioning of new services, we use this tool to identify the link capacity and do the necessary testing to ensure all the circuits are ready before the handover to the next team to operate the technology. This is something that saves a lot of time as compared to the old days."

Cons

"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."

"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."

"The battery life needs improvement. For example, when you are doing an Ethernet test, that seems to drain the battery pretty quickly."

"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."

"A feature I would like to see is the ability to charge the device via a PoE outlet. Usually, I need to charge it at home. It would be good to leave the device plugged in and charging at a PoE source at the customer site after a quick look at the network when I have moved on to other tasks."

"We use .1x authentication, so I need to download the certificate onto the device. It would be nice to have this functionality through the cloud as well. Right now, you need to do it through the software by connecting your laptop physically to the AirCheck. This is one thing that is a bit slow."

"If it was capable of downloading MIBs onto the device, then we could identify the manufacturer. Sometimes, when I am troubleshooting, there is a Mac address. For example, there is a rogue device and it just gives us a Mac address, which is fine. It gives us something, which is better than nothing. It would be nice if it was able to download a MIB where we could associate it with that Mac address and the manufacturer."

"The solution doesn't have much functional information online."

More AirCheck G3 cons

"I wish they had software that could create continuous streams of traffic. I'm not sure if that's possible with LinkRunner, but it would be very helpful in some of the test case scenarios that clients are looking for, in regards to quality of service"

"It doesn't turn off automatically, but the toning function goes to sleep. It seems to stop toning after five or six minutes if you don't find the cable. It could be up to ten minutes, but if you don't find the cable that you're trying to tone quick enough, you'll have to go back and restart the tone. So, it doesn't turn itself off, but while toning, it turns itself off."

"If it weren't for the battery, it would probably get an eight out of 10. But because of the battery, it's infuriating and it's not reliable."

"It's a bit bulky. It would be nicer if it were a little bit smaller and packed with all its features. I would also like it if the screen were a bit bigger."

"It's a little bit tough getting used to at first, but once you get the hang of it, and once you start using it more, like anything, it gets easier. The difficult part, at first, is knowing where to find each test and how to use the tests."

"It does take a little while to boot up if it's turned off."

"Being really nitpicky about the LinkRunner G2, I wish the form factor was a little bit smaller. However, I'm sure that the size of the unit is compromised by the fact that the battery is large. If that were to mean having less battery life, I would not change it."

"It runs tests quickly, but it takes a while to boot up. It's somewhat disappointing that LinkRunner takes some time to turn on. When I arrive in the space, I usually spend the first two minutes waiting."

Pricing and Cost Advice

"The overall cost of the solution, compared to the time saved—the number of man-hours devoted to other means of troubleshooting—is incomparable."

"Pricing is on par with the rest of the industry and the licensing is decent."

"For a few thousand dollars, you save yourself a ton of time. It's a great deal."

"The product has a pretty good price."

"It is definitely well worth the price. It is approximately $2,500. It pays for itself since it eliminates troubleshooting costs and labor due to all the money you would spend kind of troubleshooting the device if you didn't have any of these tools with you."

"If you find a feature you need, you have to call them and add it, but you should be able to use the product. You spend money on and invested in multiple devices and can't even use half of the features. They should negotiate with large enterprises who buy large numbers of units to provide NetAlly support for all of them at a nominal fee."

"It costs $3,000. It would be nice if its cost was less. I could then buy more. Currently, when we buy one, we make sure that where we need it is big enough, or if it is too small, when a person has a job, they have to get a temporary one mailed to them to use, which becomes a little less convenient."

"The upfront cost of the solution is around $4,000."

More AirCheck G3 pricing and cost advice

"The cost of this device is very expensive, especially with the NetAlly Care on top of the costs. It is not for personal use and would be very expensive for smaller businesses."

"Compared to another company's product, LinkRunner is cheaper, but it's still about $1,000 too expensive, considering that the operating system is a free operating system. The OS has just been tweaked to give you a graphical interface. I don't think it's priced right."

"The price was fine. You pay for the unit, and there are no licensing or maintenance fees."

"The 10Gig ones are quite expensive, and we have only two of them, but I know that this option was cheaper than the other 10Gig option we looked at, and we're very happy with it."

"It was difficult to sell this to my management because the price is really high compared to other testing tools. However, we've seen a pretty good return on investment considering our outcomes and the time we have saved. The first year has been great."

"I didn't have to buy it, but if I was going to have my choice, I wouldn't buy it just because of the price point. It works pretty well to do one thing. For the cost, it is definitely not worth it. There are other products out there that can do the same thing for probably 70% less. I am not aware of any additional costs."

"It's an expensive device. Don't expect it to be cheap. But the pricing is good. It certainly seemed in line with anything else I was looking at at the time."

"The area where the product could be improved is by having a lower cost so that I could have more than one. The price is competitive, but everybody would always like to see the price go down. I'd buy another one if it were cheaper."

Top Industries

By visitors reading reviews

Manufacturing Company

13%

Computer Software Company

12%

Comms Service Provider

11%

Government

University

11%

Government

Manufacturing Company

Healthcare Company

Company Size

By reviewers

Large Enterprise

Midsize Enterprise

Small Business

Comparisons

NetAlly EtherScope nXG vs AirCheck G3

Compared 27% of the time

AirMagnet Survey vs AirCheck G3

Compared 19% of the time

iTrinegy NE-ONE Network Emulator vs AirCheck G3

Compared 17% of the time

Broadcom Network Flow Analysis vs AirCheck G3

Compared 8% of the time

SolarWinds Network Configuration Manager vs AirCheck G3

Compared 8% of the time

More AirCheck G3 Competitors

NetAlly EtherScope nXG vs LinkRunner

Compared 30% of the time

LinkSprinter vs LinkRunner

Compared 25% of the time

IxChariot vs LinkRunner

Compared 24% of the time

OneTouch AT Network Assistant vs LinkRunner

Compared 9% of the time

Product Reports

Buyer's Guide

AirCheck G3

May 2025

Download AirCheck G3 product report

Buyer's Guide

LinkRunner

May 2025

Download LinkRunner product report

Also Known As

AirCheck G2, AirCheck

No data available

Overview

AirCheck G3 is the most cost-effective hardware-enabled site survey solution for Wi-Fi 6/6E networks. It provides network professionals of any skill level with complete and accurate information to survey and validate Wi-Fi deployments and changes, resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end users’ needs.

The new and improved battery life of 10 hours (3 - 4 hours charge) lasts you and your teams throughout the day.

AirCheck G3 Product Info

NetAlly

LinkRunner AT 3000 & 4000. Next Generation Copper and Fiber Ethernet AutoTester. Fast and comprehensive validation of network links and powerful copper and fiber network connectivity troubleshooting. Tests from 10Mbps to 10Gbps, PoE, VLAN, switch port, path analysis, packet capture, topology mapping and so much more!

NetAlly

Sample Customers

Information Not Available

Philips Healthcare, HCA Healthcare, University of South Dakota, Memorial Hermann, Baltimore County Public Schools, Aaramrak.

Buyer's Guide

AirCheck G3 vs. LinkRunner

April 2025

Free Report: AirCheck G3 vs. LinkRunner

Find out what your peers are saying about AirCheck G3 vs. LinkRunner and other solutions. Updated: April 2025.

DOWNLOAD NOW

852,098 professionals have used our research since 2012.

See our AirCheck G3 vs. LinkRunner report.

See our list of best Network Troubleshooting vendors.

We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.